Aller au contenu

vespa

Hubmaster
  • Compteur de contenus

    736
  • Inscrit(e) le

  • Dernière visite

Tout ce qui a été posté par vespa

  1. Bonjour, J'aimerai savoir, comment faire, pour que lorsque j'effectue une mise à jour sur mon site, les visiteurs arrivent sur une page leur indiquant que le site est en maintenance et ça pour n'importe quelle page sur laquelle ils essaieraient d'aller. Merci pour votre aide
  2. Pour moi certains D.C. ont fait machine arrière
  3. Mise à jour aussi pour moi sur 3 D.C. pour un de mes sites Bravo les pageshub, passer de PR0 à PR6 chapeau
  4. J'ai essayé pour plusieurs sites et je n'ai rien constaté de nouveau
  5. Bonjour, Je voudrai que Webmin se lance automatiquement au démarage d'une machine. Pour le moment je le lance comme ceci : perl /etc/webmin/start. J'ai cherche dans les configurations de webmin en ligne et je n'ai rien trouvé ... Peut être pouvez vous m'aiguiller ? Merci par avance
  6. Ok je viens de trouver le pourquoi du problème... Sous OpenBSD apache est chrooted par défault dans le répertoire /var/www/ Et le problème c'est que le script fait appel à perl qui se situe dans /usr/bin/perl ...
  7. Bonjour, J'essaie de faire tourner un petit test de script perl que je place dans le répertoire par défaut d'apache cgi-bin Le test est celui indiqué sur le site d'apache. #!/usr/bin/perl print "Content-type: text/html\r\n\r\n"; print "Hello, World."; Lorsque je l'execute en ligne de commande il fonctionne parfaitement. Lorsque je le lance via le browser j'obtiens une erreur 500 et dans les logs d'apache j'ai : Premature end of script headers : /cgi-bin/firtst.pl Cela doit venir du httpd.conf mais je ne vois pas trop ce que je dois modifier, j'ai essayé de suivre la doc d'apache sans succès pour le moment. Pour info j'ai déjà mis mon httpd.conf dans un autre post relatif à un problème de config d'awstats ici
  8. J'ai l'impression qu'il n'interprete pas les scripts CGI mais si vous aviez une petite idée ? # $OpenBSD: httpd.conf,v 1.18 2004/09/10 03:19:03 david Exp $ # # Based upon the NCSA server configuration files originally by Rob McCool. # # This is the main Apache server configuration file. It contains the # configuration directives that give the server its instructions. # See <URL:http://www.apache.org/docs/> for detailed information about # the directives. # # Do NOT simply read the instructions in here without understanding # what they do. They're here only as hints or reminders. If you are unsure # consult the online docs. You have been warned. # # After this file is processed, the server will look for and process # /var/www/conf/srm.conf and then /var/www/conf/access.conf # unless you have overridden these with ResourceConfig and/or # AccessConfig directives here. # # The configuration directives are grouped into three basic sections: # 1. Directives that control the operation of the Apache server process as a # whole (the 'global environment'). # 2. Directives that define the parameters of the 'main' or 'default' server, # which responds to requests that aren't handled by a virtual host. # These directives also provide default values for the settings # of all virtual hosts. # 3. Settings for virtual hosts, which allow Web requests to be sent to # different IP addresses or hostnames and have them handled by the # same Apache server process. # # Configuration and logfile names: If the filenames you specify for many # of the server's control files begin with "/" (or "drive:/" for Win32), the # server will use that explicit path. If the filenames do *not* begin # with "/", the value of ServerRoot is prepended -- so "logs/foo.log" # with ServerRoot set to "/usr/local/apache" will be interpreted by the # server as "/usr/local/apache/logs/foo.log". # ### Section 1: Global Environment # # The directives in this section affect the overall operation of Apache, # such as the number of concurrent requests it can handle or where it # can find its configuration files. # # # ServerType is either inetd, or standalone. Inetd mode is only supported on # Unix platforms. # ServerType standalone # # ServerRoot: The top of the directory tree under which the server's # configuration, error, and log files are kept. # # NOTE! If you intend to place this on an NFS (or otherwise network) # mounted filesystem then please read the LockFile documentation # (available at <URL:http://www.apache.org/docs/mod/core.html#lockfile>); # you will save yourself a lot of trouble. # # Do NOT add a slash at the end of the directory path. # ServerRoot "/var/www" # # The LockFile directive sets the path to the lockfile used when Apache # is compiled with either USE_FCNTL_SERIALIZED_ACCEPT or # USE_FLOCK_SERIALIZED_ACCEPT. This directive should normally be left at # its default value. The main reason for changing it is if the logs # directory is NFS mounted, since the lockfile MUST BE STORED ON A LOCAL # DISK. The PID of the main server process is automatically appended to # the filename. # #LockFile logs/accept.lock # # PidFile: The file in which the server should record its process # identification number when it starts. # PidFile logs/httpd.pid # # ScoreBoardFile: File used to store internal server process information. # Not all architectures require this. But if yours does (you'll know because # this file will be created when you run Apache) then you *must* ensure that # no two invocations of Apache share the same scoreboard file. # ScoreBoardFile logs/apache_runtime_status # # In the standard configuration, the server will process httpd.conf, # srm.conf, and access.conf in that order. The latter two files are # now deprecated and not installed any more, as it is recommended that # all directives be kept in a single file for simplicity. # #ResourceConfig conf/srm.conf #AccessConfig conf/access.conf # # Timeout: The number of seconds before receives and sends time out. # TimeOut 300 # # KeepAlive: Whether or not to allow persistent connections (more than # one request per connection). Set to "Off" to deactivate. # KeepAlive on # # MaxKeepAliveRequests: The maximum number of requests to allow # during a persistent connection. Set to 0 to allow an unlimited amount. # We recommend you leave this number high, for maximum performance. # MaxKeepAliveRequests 100 # # KeepAliveTimeout: Number of seconds to wait for the next request from the # same client on the same connection. # KeepAliveTimeout 15 # # Server-pool size regulation. Rather than making you guess how many # server processes you need, Apache dynamically adapts to the load it # sees --- that is, it tries to maintain enough server processes to # handle the current load, plus a few spare servers to handle transient # load spikes (e.g., multiple simultaneous requests from a single # Netscape browser). # # It does this by periodically checking how many servers are waiting # for a request. If there are fewer than MinSpareServers, it creates # a new spare. If there are more than MaxSpareServers, some of the # spares die off. The default values in httpd.conf-dist are probably OK # for most sites. # MinSpareServers 5 MaxSpareServers 10 # # Number of servers to start initially --- should be a reasonable ballpark # figure. # StartServers 5 # # Limit on total number of servers running, i.e., limit on the number # of clients who can simultaneously connect --- if this limit is ever # reached, clients will be LOCKED OUT, so it should NOT BE SET TOO LOW. # It is intended mainly as a brake to keep a runaway server from taking # the system with it as it spirals down... # MaxClients 150 # # MaxRequestsPerChild: the number of requests each child process is # allowed to process before the child dies. The child will exit so # as to avoid problems after prolonged use when Apache (and maybe the # libraries it uses) leak memory or other resources. On most systems, this # isn't really needed, but a few (such as Solaris) do have notable leaks # in the libraries. # MaxRequestsPerChild 0 # # Listen: Allows you to bind Apache to specific IP addresses and/or # ports, in addition to the default. See also the <VirtualHost> # directive. # #Listen 3000 #Listen 12.34.56.78:80 # # BindAddress: You can support virtual hosts with this option. This directive # is used to tell the server which IP address to listen to. It can either # contain "*", an IP address, or a fully qualified Internet domain name. # See also the <VirtualHost> and Listen directives. # #BindAddress * # # Dynamic Shared Object (DSO) Support # # To be able to use the functionality of a module which was built as a DSO you # have to place corresponding `LoadModule' lines at this location so the # directives contained in it are actually available _before_ they are used. # Please read the file README.DSO in the Apache 1.3 distribution for more # details about the DSO mechanism and run `httpd -l' for the list of already # built-in (statically linked and thus always available) modules in your httpd # binary. # # Note: The order is which modules are loaded is important. Don't change # the order below without expert advice. # # Example: # LoadModule foo_module libexec/mod_foo.so # "anonymous" user access to authenticated areas # LoadModule anon_auth_module /usr/lib/apache/modules/mod_auth_anon.so # user authentication using Berkeley DB files # LoadModule db_auth_module /usr/lib/apache/modules/mod_auth_db.so # user authentication using DBM files # LoadModule dbm_auth_module /usr/lib/apache/modules/mod_auth_dbm.so # authentication using new-style MD5 Digest Authentication (experimental) # LoadModule digest_auth_module /usr/lib/apache/modules/mod_auth_digest.so # CERN httpd metafile semantics # LoadModule cern_meta_module /usr/lib/apache/modules/mod_cern_meta.so # configuration defines ($xxx) # LoadModule define_module /usr/lib/apache/modules/mod_define.so # user authentication using old-style MD5 Digest Authentication # LoadModule digest_module /usr/lib/apache/modules/mod_digest.so # generation of Expires HTTP headers according to user-specified criteria # LoadModule expires_module /usr/lib/apache/modules/mod_expires.so # customization of HTTP response headers # LoadModule headers_module /usr/lib/apache/modules/mod_headers.so # comprehensive overview of the server configuration # LoadModule info_module /usr/lib/apache/modules/mod_info.so # logging of the client user agents (deprecated in favor of mod_log_config) # LoadModule agent_log_module /usr/lib/apache/modules/mod_log_agent.so # logging of referers (deprecated in favor of mod_log_config) # LoadModule referer_log_module /usr/lib/apache/modules/mod_log_referer.so # determining the MIME type of a file by looking at a few bytes of its contents # LoadModule mime_magic_module /usr/lib/apache/modules/mod_mime_magic.so # mmap()ing of a statically configured list of frequently requested but # not changed files (experimental) # LoadModule mmap_static_module /usr/lib/apache/modules/mod_mmap_static.so # rule-based rewriting engine to rewrite requested URLs on the fly LoadModule rewrite_module /usr/lib/apache/modules/mod_rewrite.so # attempt to correct misspellings of URLs that users might have entered # LoadModule speling_module /usr/lib/apache/modules/mod_speling.so # provides an environment variable with a unique identifier for each request # LoadModule unique_id_module /usr/lib/apache/modules/mod_unique_id.so # uses cookies to provide for a clickstream log of user activity on a site # LoadModule usertrack_module /usr/lib/apache/modules/mod_usertrack.so # dynamically configured mass virtual hosting # LoadModule vhost_alias_module /usr/lib/apache/modules/mod_vhost_alias.so # caching proxy # LoadModule proxy_module /usr/lib/apache/modules/libproxy.so LoadModule php4_module /usr/lib/apache/modules/libphp4.so # # ExtendedStatus controls whether Apache will generate "full" status # information (ExtendedStatus On) or just basic information (ExtendedStatus # Off) when the "server-status" handler is called. The default is Off. # #ExtendedStatus On ### Section 2: 'Main' server configuration # # The directives in this section set up the values used by the 'main' # server, which responds to any requests that aren't handled by a # <VirtualHost> definition. These values also provide defaults for # any <VirtualHost> containers you may define later in the file. # # All of these directives may appear inside <VirtualHost> containers, # in which case these default settings will be overridden for the # virtual host being defined. # # # If your ServerType directive (set earlier in the 'Global Environment' # section) is set to "inetd", the next few directives don't have any # effect since their settings are defined by the inetd configuration. # Skip ahead to the ServerAdmin directive. # # # Port: The port to which the standalone server listens. For # ports < 1023, you will need httpd to be run as root initially. # Port 80 ## ## SSL Support ## ## When we also provide SSL we have to listen to the ## standard HTTP port (see above) and to the HTTPS port ## <IfDefine SSL> Listen 80 Listen 443 </IfDefine> # # If you wish httpd to run as a different user or group, you must run # httpd as root initially and it will switch. # # User/Group: The name (or #number) of the user/group to run httpd as. # . On SCO (ODT 3) use "User nouser" and "Group nogroup". # . On HPUX you may not be able to use shared memory as nobody, and the # suggested workaround is to create a user www and use that user. # NOTE that some kernels refuse to setgid(Group) or semctl(IPC_SET) # when the value of (unsigned)Group is above 60000; # don't use Group #-1 on these systems! # On OpenBSD, use user www, group www. # User www Group www # # ServerAdmin: Your address, where problems with the server should be # e-mailed. This address appears on some server-generated pages, such # as error documents. # ServerAdmin you_AT_your.address # # ServerName allows you to set a host name which is sent back to clients for # your server if it's different than the one the program would get (i.e., use # "www" instead of the host's real name). # # Note: You cannot just invent host names and hope they work. The name you # define here must be a valid DNS name for your host. If you don't understand # this, ask your network administrator. # If your host doesn't have a registered DNS name, enter its IP address here. # You will have to access it by its address (e.g., [url="http://123.45.67.89/)"]http://123.45.67.89/)[/url] # anyway, and this will make redirections work in a sensible way. # #ServerName new.host.name # # DocumentRoot: The directory out of which you will serve your # documents. By default, all requests are taken from this directory, but # symbolic links and aliases may be used to point to other locations. # DocumentRoot "/var/www/htdocs" # # Each directory to which Apache has access, can be configured with respect # to which services and features are allowed and/or disabled in that # directory (and its subdirectories). # # First, we configure the "default" to be a very restrictive set of # permissions. # <Directory /> Options FollowSymLinks AllowOverride None </Directory> # # Note that from this point forward you must specifically allow # particular features to be enabled - so if something's not working as # you might expect, make sure that you have specifically enabled it # below. # # # This should be changed to whatever you set DocumentRoot to. # <Directory "/var/www/htdocs"> # # This may also be "None", "All", or any combination of "Indexes", # "Includes", "FollowSymLinks", "ExecCGI", or "MultiViews". # # Note that "MultiViews" must be named *explicitly* --- "Options All" # doesn't give it to you. # Options Indexes FollowSymLinks # # This controls which options the .htaccess files in directories can # override. Can also be "All", or any combination of "Options", "FileInfo", # "AuthConfig", and "Limit" # AllowOverride All # # Controls who can get stuff from this server. # Order allow,deny Allow from all </Directory> # # UserDir: The directory which is prepended onto a users username, within # which a users's web pages are looked for if a ~user request is received. # Relative pathes are relative to the user's home directory. # # "disabled" turns this feature off. # # Since httpd will chroot(2) to the ServerRoot path by default, # you should use # UserDir /var/www/users # and create per user directories in /var/www/users/<username> # UserDir disabled # # Control access to UserDir directories. The following is an example # for a site where these directories are restricted to read-only and # are located under /users/<username> # You will need to change this to match your site's home directories. # #<Directory /users/*> # AllowOverride FileInfo AuthConfig Limit # Options MultiViews Indexes SymLinksIfOwnerMatch IncludesNoExec # <Limit GET POST OPTIONS PROPFIND> # Order allow,deny # Allow from all # </Limit> # <Limit PUT DELETE PATCH PROPPATCH MKCOL COPY MOVE LOCK UNLOCK> # Order deny,allow # Deny from all # </Limit> #</Directory> # # DirectoryIndex: Name of the file or files to use as a pre-written HTML # directory index. Separate multiple entries with spaces. # DirectoryIndex index.html index.php index.phphtml index.php3 index.php4 # # AccessFileName: The name of the file to look for in each directory # for access control information. # AccessFileName .htaccess # # The following lines prevent .htaccess files from being viewed by # Web clients. Since .htaccess files often contain authorization # information, access is disallowed for security reasons. Comment # these lines out if you want Web visitors to see the contents of # .htaccess files. If you change the AccessFileName directive above, # be sure to make the corresponding changes here. # <Files .htaccess> Order allow,deny Deny from all </Files> # # CacheNegotiatedDocs: By default, Apache sends "Pragma: no-cache" with each # document that was negotiated on the basis of content. This asks proxy # servers not to cache the document. Uncommenting the following line disables # this behavior, and proxies will be allowed to cache the documents. # #CacheNegotiatedDocs # # UseCanonicalName: (new for 1.3) With this setting turned on, whenever # Apache needs to construct a self-referencing URL (a URL that refers back # to the server the response is coming from) it will use ServerName and # Port to form a "canonical" name. With this setting off, Apache will # use the hostname:port that the client supplied, when possible. This # also affects SERVER_NAME and SERVER_PORT in CGI scripts. # UseCanonicalName On # # TypesConfig describes where the mime.types file (or equivalent) is # to be found. # TypesConfig conf/mime.types # # DefaultType is the default MIME type the server will use for a document # if it cannot otherwise determine one, such as from filename extensions. # If your server contains mostly text or HTML documents, "text/plain" is # a good value. If most of your content is binary, such as applications # or images, you may want to use "application/octet-stream" instead to # keep browsers from trying to display binary files as though they are # text. # DefaultType text/plain # # The mod_mime_magic module allows the server to use various hints from the # contents of the file itself to determine its type. The MIMEMagicFile # directive tells the module where the hint definitions are located. # mod_mime_magic is not part of the default server (you have to add # it yourself with a LoadModule [see the DSO paragraph in the 'Global # Environment' section], or recompile the server and include mod_mime_magic # as part of the configuration), so it's enclosed in an <IfModule> container. # This means that the MIMEMagicFile directive will only be processed if the # module is part of the server. # <IfModule mod_mime_magic.c> MIMEMagicFile conf/magic </IfModule> # # HostnameLookups: Log the names of clients or just their IP addresses # e.g., www.apache.org (on) or 204.62.129.132 (off). # The default is off because it'd be overall better for the net if people # had to knowingly turn this feature on, since enabling it means that # each client request will result in AT LEAST one lookup request to the # nameserver. # HostnameLookups Off # # ErrorLog: The location of the error log file. # If you do not specify an ErrorLog directive within a <VirtualHost> # container, error messages relating to that virtual host will be # logged here. If you *do* define an error logfile for a <VirtualHost> # container, that host's errors will be logged there and not here. # ErrorLog logs/error_log # # LogLevel: Control the number of messages logged to the error_log. # Possible values include: debug, info, notice, warn, error, crit, # alert, emerg. # LogLevel warn # # The following directives define some format nicknames for use with # a CustomLog directive (see below). # LogFormat "%h %l %u %t \"%r\" %>s %b \"%{Referer}i\" \"%{User-Agent}i\"" combined LogFormat "%h %l %u %t \"%r\" %>s %b" common LogFormat "%{Referer}i -> %U" referer LogFormat "%{User-agent}i" agent # # The location and format of the access logfile (Common Logfile Format). # If you do not define any access logfiles within a <VirtualHost> # container, they will be logged here. Contrariwise, if you *do* # define per-<VirtualHost> access logfiles, transactions will be # logged therein and *not* in this file. # #CustomLog logs/access_log common # # If you would like to have agent and referer logfiles, uncomment the # following directives. # #CustomLog logs/referer_log referer #CustomLog logs/agent_log agent # # If you prefer a single logfile with access, agent, and referer information # (Combined Logfile Format) you can use the following directive. # CustomLog logs/access_log combined # # Optionally add a line containing the server version and virtual host # name to server-generated pages (error documents, FTP directory listings, # mod_status and mod_info output etc., but not CGI generated documents). # Set to "EMail" to also include a mailto: link to the ServerAdmin. # Set to one of: On | Off | EMail # ServerSignature On # # Aliases: Add here as many aliases as you need (with no limit). The format is # Alias fakename realname # # Note that if you include a trailing / on fakename then the server will # require it to be present in the URL. So "/icons" isn't aliased in this # example, only "/icons/".. # Alias /icons/ "/var/www/icons/" <Directory "/var/www/icons"> Options Indexes MultiViews AllowOverride None Order allow,deny Allow from all </Directory> <Directory "/var/www/htdocs/manual"> Options MultiViews AllowOverride None Order allow,deny Allow from all </Directory> # # ScriptAlias: This controls which directories contain server scripts. # ScriptAliases are essentially the same as Aliases, except that # documents in the realname directory are treated as applications and # run by the server when requested rather than as documents sent to the client. # The same rules about trailing "/" apply to ScriptAlias directives as to # Alias. # #ScriptAlias /cgi-bin/ "/var/www/cgi-bin/" # # "/var/www/cgi-bin" should be changed to whatever your ScriptAliased # CGI directory exists, if you have that configured. # <Directory "/var/www/cgi-bin"> AllowOverride All Options ExecCGI Order allow,deny Allow from all </Directory> # # Redirect allows you to tell clients about documents which used to exist in # your server's namespace, but do not anymore. This allows you to tell the # clients where to look for the relocated document. # Format: Redirect old-URI new-URL # # # Directives controlling the display of server-generated directory listings. # # # FancyIndexing is whether you want fancy directory indexing or standard # IndexOptions FancyIndexing # # AddIcon* directives tell the server which icon to show for different # files or filename extensions. These are only displayed for # FancyIndexed directories. # AddIconByEncoding (CMP,/icons/compressed.gif) x-compress x-gzip AddIconByType (TXT,/icons/text.gif) text/* AddIconByType (IMG,/icons/image2.gif) image/* AddIconByType (SND,/icons/sound2.gif) audio/* AddIconByType (VID,/icons/movie.gif) video/* AddIcon /icons/binary.gif .bin .exe AddIcon /icons/binhex.gif .hqx AddIcon /icons/tar.gif .tar AddIcon /icons/world2.gif .wrl .wrl.gz .vrml .vrm .iv AddIcon /icons/compressed.gif .Z .z .tgz .gz .zip AddIcon /icons/a.gif .ps .ai .eps AddIcon /icons/layout.gif .html .shtml .htm .pdf AddIcon /icons/text.gif .txt AddIcon /icons/c.gif .c AddIcon /icons/p.gif .pl .py AddIcon /icons/f.gif .for AddIcon /icons/dvi.gif .dvi AddIcon /icons/uuencoded.gif .uu AddIcon /icons/script.gif .conf .sh .shar .csh .ksh .tcl AddIcon /icons/tex.gif .tex AddIcon /icons/bomb.gif core AddIcon /icons/back.gif .. AddIcon /icons/hand.right.gif README AddIcon /icons/folder.gif ^^DIRECTORY^^ AddIcon /icons/blank.gif ^^BLANKICON^^ # # DefaultIcon is which icon to show for files which do not have an icon # explicitly set. # DefaultIcon /icons/unknown.gif # # AddDescription allows you to place a short description after a file in # server-generated indexes. These are only displayed for FancyIndexed # directories. # Format: AddDescription "description" filename # #AddDescription "GZIP compressed document" .gz #AddDescription "tar archive" .tar #AddDescription "GZIP compressed tar archive" .tgz # # ReadmeName is the name of the README file the server will look for by # default, and append to directory listings. # # HeaderName is the name of a file which should be prepended to # directory indexes. # # The server will first look for name.html and include it if found. # If name.html doesn't exist, the server will then look for name.txt # and include it as plaintext if found. # ReadmeName README HeaderName HEADER # # IndexIgnore is a set of filenames which directory indexing should ignore # and not include in the listing. Shell-style wildcarding is permitted. # IndexIgnore .??* *~ *# HEADER* README* RCS CVS *,v *,t # # AddEncoding allows you to have certain browsers (Mosaic/X 2.1+) uncompress # information on the fly. Note: Not all browsers support this. # Despite the name similarity, the following Add* directives have nothing # to do with the FancyIndexing customization directives above. # AddEncoding x-compress Z AddEncoding x-gzip gz # # AddLanguage allows you to specify the language of a document. You can # then use content negotiation to give a browser a file in a language # it can understand. Note that the suffix does not have to be the same # as the language keyword --- those with documents in Polish (whose # net-standard language code is pl) may wish to use "AddLanguage pl .po" # to avoid the ambiguity with the common suffix for perl scripts. # AddLanguage en .en AddLanguage fr .fr AddLanguage de .de AddLanguage da .da AddLanguage el .el AddLanguage it .it # # LanguagePriority allows you to give precedence to some languages # in case of a tie during content negotiation. # Just list the languages in decreasing order of preference. # LanguagePriority en fr de # # AddType allows you to tweak mime.types without actually editing it, or to # make certain files to be certain types. # # For example, the PHP module (not part of the Apache distribution) # will typically use: # AddType application/x-httpd-php .php # # AddHandler allows you to map certain file extensions to "handlers", # actions unrelated to filetype. These can be either built into the server # or added with the Action command (see below) # # If you want to use server side includes, or CGI outside # ScriptAliased directories, uncomment the following lines. # # To use CGI scripts: # AddHandler cgi-script .cgi .pl # # To use server-parsed HTML files # #AddType text/html .shtml #AddHandler server-parsed .shtml # # Uncomment the following line to enable Apache's send-asis HTTP file # feature # #AddHandler send-as-is asis # # If you wish to use server-parsed imagemap files, use # AddHandler imap-file map # # To enable type maps, you might want to use # #AddHandler type-map var # # Action lets you define media types that will execute a script whenever # a matching file is called. This eliminates the need for repeated URL # pathnames for oft-used CGI file processors. # Format: Action media/type /cgi-script/location # Format: Action handler-name /cgi-script/location # # # MetaDir: specifies the name of the directory in which Apache can find # meta information files. These files contain additional HTTP headers # to include when sending the document # #MetaDir .web # # MetaSuffix: specifies the file name suffix for the file containing the # meta information. # #MetaSuffix .meta # # Customizable error response (Apache style) # these come in three flavors # # 1) plain text #ErrorDocument 500 "The server made a boo boo. # n.b. the (") marks it as text, it does not get output # # 2) local redirects #ErrorDocument 404 /missing.html # to redirect to local URL /missing.html #ErrorDocument 404 /cgi-bin/missing_handler.pl # N.B.: You can redirect to a script or a document using server-side-includes. # # 3) external redirects #ErrorDocument 402 [url="http://some.other_server.com/subscription_info.html"]http://some.other_server.com/subscription_info.html[/url] # N.B.: Many of the environment variables associated with the original # request will *not* be available to such a script. # # The following directives modify normal HTTP response behavior. # The first directive disables keepalive for Netscape 2.x and browsers that # spoof it. There are known problems with these browser implementations. # The second directive is for Microsoft Internet Explorer 4.0b2 # which has a broken HTTP/1.1 implementation and does not properly # support keepalive when it is used on 301 or 302 (redirect) responses. # BrowserMatch "Mozilla/2" nokeepalive BrowserMatch "MSIE 4\.0b2;" nokeepalive downgrade-1.0 force-response-1.0 # # The following directive disables HTTP/1.1 responses to browsers which # are in violation of the HTTP/1.0 spec by not being able to grok a # basic 1.1 response. # BrowserMatch "RealPlayer 4\.0" force-response-1.0 BrowserMatch "Java/1\.0" force-response-1.0 BrowserMatch "JDK/1\.0" force-response-1.0 # # Allow server status reports, with the URL of [url="http://servername/server-status"]http://servername/server-status[/url] # Change the ".your_domain.com" to match your domain to enable. # #<Location /server-status> # SetHandler server-status # Order deny,allow # Deny from all # Allow from .your_domain.com #</Location> # # Allow remote server configuration reports, with the URL of # [url="http://servername/server-info"]http://servername/server-info[/url] (requires that mod_info.c be loaded). # Change the ".your_domain.com" to match your domain to enable. # #<Location /server-info> # SetHandler server-info # Order deny,allow # Deny from all # Allow from .your_domain.com #</Location> # # There have been reports of people trying to abuse an old bug from pre-1.1 # days. This bug involved a CGI script distributed as a part of Apache. # By uncommenting these lines you can redirect these attacks to a logging # script on phf.apache.org. Or, you can record them yourself, using the script # support/phf_abuse_log.cgi. # #<Location /cgi-bin/phf*> # Deny from all # ErrorDocument 403 [url="http://phf.apache.org/phf_abuse_log.cgi"]http://phf.apache.org/phf_abuse_log.cgi[/url] #</Location> # # Proxy Server directives. Uncomment the following lines to # enable the proxy server: # #<IfModule mod_proxy.c> #ProxyRequests On # #<Directory proxy:*> # Order deny,allow # Deny from all # Allow from .your_domain.com #</Directory> # # Enable/disable the handling of HTTP/1.1 "Via:" headers. # ("Full" adds the server version; "Block" removes all outgoing Via: headers) # Set to one of: Off | On | Full | Block # #ProxyVia On # # To enable the cache as well, edit and uncomment the following lines: # (no cacheing without CacheRoot) # #CacheRoot "/var/www/proxy" #CacheSize 5 #CacheGcInterval 4 #CacheMaxExpire 24 #CacheLastModifiedFactor 0.1 #CacheDefaultExpire 1 #NoCache a_domain.com another_domain.edu joes.garage_sale.com #</IfModule> # End of proxy directives. ### Section 3: Virtual Hosts # # VirtualHost: If you want to maintain multiple domains/hostnames on your # machine you can setup VirtualHost containers for them. # Please see the documentation at <URL:http://www.apache.org/docs/vhosts/> # for further details before you try to setup virtual hosts. # You may use the command line option '-S' to verify your virtual host # configuration. # # If you want to use name-based virtual hosts you need to define at # least one IP address (and port number) for them. # #NameVirtualHost 12.34.56.78:80 #NameVirtualHost 12.34.56.78 # # VirtualHost example: # Almost any Apache directive may go into a VirtualHost container. # #<VirtualHost ip.address.of.host.some_domain.com> # ServerAdmin webmaster_AT_host.some_domain.com # DocumentRoot /www/docs/host.some_domain.com # ServerName host.some_domain.com # ErrorLog logs/host.some_domain.com-error_log # CustomLog logs/host.some_domain.com-access_log common #</VirtualHost> #<VirtualHost _default_:*> #</VirtualHost> ## ## SSL Global Context ## ## All SSL configuration in this context applies both to ## the main server and all SSL-enabled virtual hosts. ## # # Some MIME-types for downloading Certificates and CRLs # <IfDefine SSL> AddType application/x-x509-ca-cert .crt AddType application/x-pkcs7-crl .crl </IfDefine> <IfModule mod_ssl.c> # Pass Phrase Dialog: # Configure the pass phrase gathering process. # The filtering dialog program (`builtin' is a internal # terminal dialog) has to provide the pass phrase on stdout. SSLPassPhraseDialog builtin # Inter-Process Session Cache: # Configure the SSL Session Cache: First either `none' # or `dbm:/path/to/file' for the mechanism to use and # second the expiring timeout (in seconds). SSLSessionCache dbm:logs/ssl_scache SSLSessionCacheTimeout 300 # Semaphore: # Configure the path to the mutual exclusion semaphore the # SSL engine uses internally for inter-process synchronization. SSLMutex sem # Pseudo Random Number Generator (PRNG): # Configure one or more sources to seed the PRNG of the # SSL library. The seed data should be of good random quality. SSLRandomSeed startup builtin SSLRandomSeed connect builtin #SSLRandomSeed startup file:/dev/random 512 #SSLRandomSeed startup file:/dev/urandom 512 #SSLRandomSeed connect file:/dev/random 512 #SSLRandomSeed connect file:/dev/urandom 512 SSLRandomSeed startup file:/dev/arandom 512 # Logging: # The home of the dedicated SSL protocol logfile. Errors are # additionally duplicated in the general error log file. Put # this somewhere where it cannot be used for symlink attacks on # a real server (i.e. somewhere where only root can write). # Log levels are (ascending order: higher ones include lower ones): # none, error, warn, info, trace, debug. SSLLog logs/ssl_engine_log SSLLogLevel info </IfModule> <IfDefine SSL> ## ## SSL Virtual Host Context ## <VirtualHost _default_:443> # General setup for the virtual host DocumentRoot /var/www/htdocs ServerName new.host.name ServerAdmin you_AT_your.address ErrorLog logs/error_log TransferLog logs/access_log # SSL Engine Switch: # Enable/Disable SSL for this virtual host. SSLEngine on # SSL Cipher Suite: # List the ciphers that the client is permitted to negotiate. # See the mod_ssl documentation for a complete list. #SSLCipherSuite ALL:!ADH:RC4+RSA:+HIGH:+MEDIUM:+LOW:+SSLv2:+EXP # Server Certificate: # Point SSLCertificateFile at a PEM encoded certificate. If # the certificate is encrypted, then you will be prompted for a # pass phrase. Note that a kill -HUP will prompt again. A test # certificate can be generated with `make certificate' under # built time. SSLCertificateFile /etc/ssl/server.crt # Server Private Key: # If the key is not combined with the certificate, use this # directive to point at the key file. SSLCertificateKeyFile /etc/ssl/private/server.key # Certificate Authority (CA): # Set the CA certificate verification path where to find CA # certificates for client authentication or alternatively one # huge file containing all of them (file must be PEM encoded) # Note: Inside SSLCACertificatePath you need hash symlinks # to point to the certificate files. Use the provided # Makefile to update the hash symlinks after changes. #SSLCACertificatePath /var/www/conf/ssl.crt #SSLCACertificateFile /var/www/conf/ssl.crt/ca-bundle.crt # Client Authentication (Type): # Client certificate verification type and depth. Types are # none, optional, require and optional_no_ca. Depth is a # number which specifies how deeply to verify the certificate # issuer chain before deciding the certificate is not valid. #SSLVerifyClient require #SSLVerifyDepth 10 # Access Control: # With SSLRequire you can do per-directory access control based # on arbitrary complex boolean expressions containing server # variable checks and other lookup directives. The syntax is a # mixture between C and Perl. See the mod_ssl documentation # for more details. #<Location /> #SSLRequire ( %{SSL_CIPHER} !~ m/^(EXP|NULL)-/ \ # and %{SSL_CLIENT_S_DN_O} eq "Snake Oil, Ltd." \ # and %{SSL_CLIENT_S_DN_OU} in {"Staff", "CA", "Dev"} \ # and %{TIME_WDAY} >= 1 and %{TIME_WDAY} <= 5 \ # and %{TIME_HOUR} >= 8 and %{TIME_HOUR} <= 20 ) \ # or %{REMOTE_ADDR} =~ m/^192\.76\.162\.[0-9]+$/ #</Location> # SSL Engine Options: # Set various options for the SSL engine. # FakeBasicAuth: # Translate the client X.509 into a Basic Authorisation. This means that # the standard Auth/DBMAuth methods can be used for access control. The # user name is the `one line' version of the client's X.509 certificate. # Note that no password is obtained from the user. Every entry in the user # file needs this password: `xxj31ZMTZzkVA'. # ExportCertData: # This exports two additional environment variables: SSL_CLIENT_CERT and # SSL_SERVER_CERT. These contain the PEM-encoded certificates of the # server (always existing) and the client (only existing when client # authentication is used). This can be used to import the certificates # into CGI scripts. # CompatEnvVars: # This exports obsolete environment variables for backward compatibility # to Apache-SSL 1.x, mod_ssl 2.0.x, Sioux 1.0 and Stronghold 2.x. Use this # to provide compatibility to existing CGI scripts. #SSLOptions +FakeBasicAuth +ExportCertData +CompatEnvVars # Per-Server Logging: # The home of a custom SSL log file. Use this when you want a # compact non-error SSL logfile on a virtual host basis. CustomLog logs/ssl_request_log \ "%t %h %{SSL_PROTOCOL}x %{SSL_CIPHER}x \"%r\" %b" </VirtualHost> </IfDefine> # # Directives to allow use of AWStats as a CGI # Alias /awstatsclasses "/usr/local/awstats/wwwroot/classes/" Alias /awstatscss "/usr/local/awstats/wwwroot/css/" Alias /awstatsicons "/usr/local/awstats/wwwroot/icon/" ScriptAlias /awstats/ "/usr/local/awstats/wwwroot/cgi-bin/" # # This is to permit URL access to scripts/files in AWStats directory. # <Directory "/usr/local/awstats/wwwroot"> Options ExecCGI AllowOverride All Order allow,deny Allow from all </Directory>
  9. Salut Jean-Luc Je viens de tester, et cela ne fonctionne ni avec un fichier html ni avec un cgi Je comprend pas car j'ai bien la ligne : ScriptAlias /awstats/ "/usr/local/awstats/wwwroot/cgi-bin/" Et quand on regarde les logs il va bien dans ce repertoire là mais ne trouve rien
  10. De même si je génere par ligne de commande une page html de rapport de stats, cela fonctionne.. Mais toujours le soucis pour y accéder en ligne
  11. Salut Dan, Oups je n'ai pas été très clair sur ce petit problème sur ma machine de test. Dans le fichier de conf d'apache j'ai bien toutes les directives indiquées dans la doc d'awstats et les chemins sont corrects. - Lorsque j'update les stats cela fonctionne par contre parfaitement : perl awstats.pl -update -config=demo - Par contre, j''ai une belle erreur 404 lorsque je veux consulter les stats via mon browser. Lorsque je regarde le fichier de log sous apache je vois : log script not found or unable to stat /usr/local/awstats/wwwroot/cgi-bin/awstats.pl Le chemin est pourtant correct Là je ne vois pas vraiment d'ou cela peut venir.
  12. Avez vous trouvé la solution car j'ai exactemment le même problème et je n'ai rien trouvé dessus sur le net
  13. Pour ma part les backlinks n'évoluent pas trop et mon PR ne bouge pas
  14. Oki super Dan Donc je peux faire NameVirtualHost 192.168.0.2:80 <VirtualHost 192.168.0.2> ServerAdmin webmaster_AT_no-spam.com DocumentRoot /var/www/htdocs/stats ServerName monstre.***.fr ErrorLog /var/log/stats.***.fr-error_log CustomLog /var/log/stats.***.fr-access_log combined <Files "/var/www/htdocs/stats"> </Files> ServerPath /var/www/htdocs/stats </VirtualHost> <VirtualHost 192.168.0.2> ServerAdmin webmaster_AT_no-spam.com DocumentRoot /var/www/htdocs/stats ServerName toto.***.fr ErrorLog /var/log/toto.***.fr-error_log CustomLog /var/log/toto.***.fr-access_log combined <Files "/var/www/htdocs/toto"> </Files> ServerPath /var/www/htdocs/toto </VirtualHost> Dernière question mais pour faire les choses correctemment faut il ajouter quelque chose dans le /etc/host ? Merci pour tout
  15. J'ai essayé et dans ce cas cela fonctionne, mais en faisant comme ça je ne peux pas avoir plusieurs virtualhosts sur cette machine ???
  16. Bonjour, J'essai de configurer des virtualhosts sur ma machine de test sans succès depuis 2 jours, c'est pourquoi je me suis résigné à demandé de l'aide car je dois passer à côté d'un détail sans le voir. Voici ce que je met dans le httpd.conf pour le virtualhost. <VirtualHost monstre.****.fr:*> ServerAdmin webmaster_AT_no-spam.com DocumentRoot /var/www/htdocs/stats ServerName monstre.****.fr ErrorLog /var/log/stats.****.fr-error_log CustomLog /var/log/stats.****.fr-access_log combined <Files "/var/www/htdocs/stats"> </Files> ServerPath /var/www/htdocs/stats </VirtualHost> En fait il me renvoit toujours malgré le virtualhost vers le répertoire par défaut d'apache /var/www/htdocs/ Là je ne vois pas trop... Ci-dessous le httpd.conf en entier # $OpenBSD: httpd.conf,v 1.18 2004/09/10 03:19:03 david Exp $ # # Based upon the NCSA server configuration files originally by Rob McCool. # # This is the main Apache server configuration file. It contains the # configuration directives that give the server its instructions. # See <URL:http://www.apache.org/docs/> for detailed information about # the directives. # # Do NOT simply read the instructions in here without understanding # what they do. They're here only as hints or reminders. If you are unsure # consult the online docs. You have been warned. # # After this file is processed, the server will look for and process # /var/www/conf/srm.conf and then /var/www/conf/access.conf # unless you have overridden these with ResourceConfig and/or # AccessConfig directives here. # # The configuration directives are grouped into three basic sections: # 1. Directives that control the operation of the Apache server process as a # whole (the 'global environment'). # 2. Directives that define the parameters of the 'main' or 'default' server, # which responds to requests that aren't handled by a virtual host. # These directives also provide default values for the settings # of all virtual hosts. # 3. Settings for virtual hosts, which allow Web requests to be sent to # different IP addresses or hostnames and have them handled by the # same Apache server process. # # Configuration and logfile names: If the filenames you specify for many # of the server's control files begin with "/" (or "drive:/" for Win32), the # server will use that explicit path. If the filenames do *not* begin # with "/", the value of ServerRoot is prepended -- so "logs/foo.log" # with ServerRoot set to "/usr/local/apache" will be interpreted by the # server as "/usr/local/apache/logs/foo.log". # ### Section 1: Global Environment # # The directives in this section affect the overall operation of Apache, # such as the number of concurrent requests it can handle or where it # can find its configuration files. # # # ServerType is either inetd, or standalone. Inetd mode is only supported on # Unix platforms. # ServerType standalone # # ServerRoot: The top of the directory tree under which the server's # configuration, error, and log files are kept. # # NOTE! If you intend to place this on an NFS (or otherwise network) # mounted filesystem then please read the LockFile documentation # (available at <URL:http://www.apache.org/docs/mod/core.html#lockfile>); # you will save yourself a lot of trouble. # # Do NOT add a slash at the end of the directory path. # ServerRoot "/var/www" # # The LockFile directive sets the path to the lockfile used when Apache # is compiled with either USE_FCNTL_SERIALIZED_ACCEPT or # USE_FLOCK_SERIALIZED_ACCEPT. This directive should normally be left at # its default value. The main reason for changing it is if the logs # directory is NFS mounted, since the lockfile MUST BE STORED ON A LOCAL # DISK. The PID of the main server process is automatically appended to # the filename. # #LockFile logs/accept.lock # # PidFile: The file in which the server should record its process # identification number when it starts. # PidFile logs/httpd.pid # # ScoreBoardFile: File used to store internal server process information. # Not all architectures require this. But if yours does (you'll know because # this file will be created when you run Apache) then you *must* ensure that # no two invocations of Apache share the same scoreboard file. # ScoreBoardFile logs/apache_runtime_status # # In the standard configuration, the server will process httpd.conf, # srm.conf, and access.conf in that order. The latter two files are # now deprecated and not installed any more, as it is recommended that # all directives be kept in a single file for simplicity. # #ResourceConfig conf/srm.conf #AccessConfig conf/access.conf # # Timeout: The number of seconds before receives and sends time out. # Timeout 300 # # KeepAlive: Whether or not to allow persistent connections (more than # one request per connection). Set to "Off" to deactivate. # KeepAlive On # # MaxKeepAliveRequests: The maximum number of requests to allow # during a persistent connection. Set to 0 to allow an unlimited amount. # We recommend you leave this number high, for maximum performance. # MaxKeepAliveRequests 100 # # KeepAliveTimeout: Number of seconds to wait for the next request from the # same client on the same connection. # KeepAliveTimeout 15 # # Server-pool size regulation. Rather than making you guess how many # server processes you need, Apache dynamically adapts to the load it # sees --- that is, it tries to maintain enough server processes to # handle the current load, plus a few spare servers to handle transient # load spikes (e.g., multiple simultaneous requests from a single # Netscape browser). # # It does this by periodically checking how many servers are waiting # for a request. If there are fewer than MinSpareServers, it creates # a new spare. If there are more than MaxSpareServers, some of the # spares die off. The default values in httpd.conf-dist are probably OK # for most sites. # MinSpareServers 5 MaxSpareServers 10 # # Number of servers to start initially --- should be a reasonable ballpark # figure. # StartServers 5 # # Limit on total number of servers running, i.e., limit on the number # of clients who can simultaneously connect --- if this limit is ever # reached, clients will be LOCKED OUT, so it should NOT BE SET TOO LOW. # It is intended mainly as a brake to keep a runaway server from taking # the system with it as it spirals down... # MaxClients 150 # # MaxRequestsPerChild: the number of requests each child process is # allowed to process before the child dies. The child will exit so # as to avoid problems after prolonged use when Apache (and maybe the # libraries it uses) leak memory or other resources. On most systems, this # isn't really needed, but a few (such as Solaris) do have notable leaks # in the libraries. # MaxRequestsPerChild 0 # # Listen: Allows you to bind Apache to specific IP addresses and/or # ports, in addition to the default. See also the <VirtualHost> # directive. # #Listen 3000 #Listen 12.34.56.78:80 # # BindAddress: You can support virtual hosts with this option. This directive # is used to tell the server which IP address to listen to. It can either # contain "*", an IP address, or a fully qualified Internet domain name. # See also the <VirtualHost> and Listen directives. # #BindAddress * # # Dynamic Shared Object (DSO) Support # # To be able to use the functionality of a module which was built as a DSO you # have to place corresponding `LoadModule' lines at this location so the # directives contained in it are actually available _before_ they are used. # Please read the file README.DSO in the Apache 1.3 distribution for more # details about the DSO mechanism and run `httpd -l' for the list of already # built-in (statically linked and thus always available) modules in your httpd # binary. # # Note: The order is which modules are loaded is important. Don't change # the order below without expert advice. # # Example: # LoadModule foo_module libexec/mod_foo.so # "anonymous" user access to authenticated areas # LoadModule anon_auth_module /usr/lib/apache/modules/mod_auth_anon.so # user authentication using Berkeley DB files # LoadModule db_auth_module /usr/lib/apache/modules/mod_auth_db.so # user authentication using DBM files # LoadModule dbm_auth_module /usr/lib/apache/modules/mod_auth_dbm.so # authentication using new-style MD5 Digest Authentication (experimental) # LoadModule digest_auth_module /usr/lib/apache/modules/mod_auth_digest.so # CERN httpd metafile semantics # LoadModule cern_meta_module /usr/lib/apache/modules/mod_cern_meta.so # configuration defines ($xxx) # LoadModule define_module /usr/lib/apache/modules/mod_define.so # user authentication using old-style MD5 Digest Authentication # LoadModule digest_module /usr/lib/apache/modules/mod_digest.so # generation of Expires HTTP headers according to user-specified criteria # LoadModule expires_module /usr/lib/apache/modules/mod_expires.so # customization of HTTP response headers # LoadModule headers_module /usr/lib/apache/modules/mod_headers.so # comprehensive overview of the server configuration # LoadModule info_module /usr/lib/apache/modules/mod_info.so # logging of the client user agents (deprecated in favor of mod_log_config) # LoadModule agent_log_module /usr/lib/apache/modules/mod_log_agent.so # logging of referers (deprecated in favor of mod_log_config) # LoadModule referer_log_module /usr/lib/apache/modules/mod_log_referer.so # determining the MIME type of a file by looking at a few bytes of its contents # LoadModule mime_magic_module /usr/lib/apache/modules/mod_mime_magic.so # mmap()ing of a statically configured list of frequently requested but # not changed files (experimental) # LoadModule mmap_static_module /usr/lib/apache/modules/mod_mmap_static.so # rule-based rewriting engine to rewrite requested URLs on the fly # LoadModule rewrite_module /usr/lib/apache/modules/mod_rewrite.so # attempt to correct misspellings of URLs that users might have entered # LoadModule speling_module /usr/lib/apache/modules/mod_speling.so # provides an environment variable with a unique identifier for each request # LoadModule unique_id_module /usr/lib/apache/modules/mod_unique_id.so # uses cookies to provide for a clickstream log of user activity on a site # LoadModule usertrack_module /usr/lib/apache/modules/mod_usertrack.so # dynamically configured mass virtual hosting # LoadModule vhost_alias_module /usr/lib/apache/modules/mod_vhost_alias.so # caching proxy # LoadModule proxy_module /usr/lib/apache/modules/libproxy.so # # ExtendedStatus controls whether Apache will generate "full" status # information (ExtendedStatus On) or just basic information (ExtendedStatus # Off) when the "server-status" handler is called. The default is Off. # #ExtendedStatus On ### Section 2: 'Main' server configuration # # The directives in this section set up the values used by the 'main' # server, which responds to any requests that aren't handled by a # <VirtualHost> definition. These values also provide defaults for # any <VirtualHost> containers you may define later in the file. # # All of these directives may appear inside <VirtualHost> containers, # in which case these default settings will be overridden for the # virtual host being defined. # # # If your ServerType directive (set earlier in the 'Global Environment' # section) is set to "inetd", the next few directives don't have any # effect since their settings are defined by the inetd configuration. # Skip ahead to the ServerAdmin directive. # # # Port: The port to which the standalone server listens. For # ports < 1023, you will need httpd to be run as root initially. # Port 80 ## ## SSL Support ## ## When we also provide SSL we have to listen to the ## standard HTTP port (see above) and to the HTTPS port ## <IfDefine SSL> Listen 80 Listen 443 </IfDefine> # # If you wish httpd to run as a different user or group, you must run # httpd as root initially and it will switch. # # User/Group: The name (or #number) of the user/group to run httpd as. # . On SCO (ODT 3) use "User nouser" and "Group nogroup". # . On HPUX you may not be able to use shared memory as nobody, and the # suggested workaround is to create a user www and use that user. # NOTE that some kernels refuse to setgid(Group) or semctl(IPC_SET) # when the value of (unsigned)Group is above 60000; # don't use Group #-1 on these systems! # On OpenBSD, use user www, group www. # User www Group www # # ServerAdmin: Your address, where problems with the server should be # e-mailed. This address appears on some server-generated pages, such # as error documents. # ServerAdmin you_AT_your.address # # ServerName allows you to set a host name which is sent back to clients for # your server if it's different than the one the program would get (i.e., use # "www" instead of the host's real name). # # Note: You cannot just invent host names and hope they work. The name you # define here must be a valid DNS name for your host. If you don't understand # this, ask your network administrator. # If your host doesn't have a registered DNS name, enter its IP address here. # You will have to access it by its address (e.g., [url="http://123.45.67.89/)"]http://123.45.67.89/)[/url] # anyway, and this will make redirections work in a sensible way. # #ServerName new.host.name # # DocumentRoot: The directory out of which you will serve your # documents. By default, all requests are taken from this directory, but # symbolic links and aliases may be used to point to other locations. # DocumentRoot "/var/www/htdocs" # # Each directory to which Apache has access, can be configured with respect # to which services and features are allowed and/or disabled in that # directory (and its subdirectories). # # First, we configure the "default" to be a very restrictive set of # permissions. # <Directory /> Options FollowSymLinks AllowOverride None </Directory> # # Note that from this point forward you must specifically allow # particular features to be enabled - so if something's not working as # you might expect, make sure that you have specifically enabled it # below. # # # This should be changed to whatever you set DocumentRoot to. # <Directory "/var/www/htdocs"> # # This may also be "None", "All", or any combination of "Indexes", # "Includes", "FollowSymLinks", "ExecCGI", or "MultiViews". # # Note that "MultiViews" must be named *explicitly* --- "Options All" # doesn't give it to you. # Options Indexes FollowSymLinks # # This controls which options the .htaccess files in directories can # override. Can also be "All", or any combination of "Options", "FileInfo", # "AuthConfig", and "Limit" # AllowOverride All # # Controls who can get stuff from this server. # Order allow,deny Allow from all </Directory> # # UserDir: The directory which is prepended onto a users username, within # which a users's web pages are looked for if a ~user request is received. # Relative pathes are relative to the user's home directory. # # "disabled" turns this feature off. # # Since httpd will chroot(2) to the ServerRoot path by default, # you should use # UserDir /var/www/users # and create per user directories in /var/www/users/<username> # UserDir disabled # # Control access to UserDir directories. The following is an example # for a site where these directories are restricted to read-only and # are located under /users/<username> # You will need to change this to match your site's home directories. # #<Directory /users/*> # AllowOverride FileInfo AuthConfig Limit # Options MultiViews Indexes SymLinksIfOwnerMatch IncludesNoExec # <Limit GET POST OPTIONS PROPFIND> # Order allow,deny # Allow from all # </Limit> # <Limit PUT DELETE PATCH PROPPATCH MKCOL COPY MOVE LOCK UNLOCK> # Order deny,allow # Deny from all # </Limit> #</Directory> # # DirectoryIndex: Name of the file or files to use as a pre-written HTML # directory index. Separate multiple entries with spaces. # DirectoryIndex index.html # # AccessFileName: The name of the file to look for in each directory # for access control information. # AccessFileName .htaccess # # The following lines prevent .htaccess files from being viewed by # Web clients. Since .htaccess files often contain authorization # information, access is disallowed for security reasons. Comment # these lines out if you want Web visitors to see the contents of # .htaccess files. If you change the AccessFileName directive above, # be sure to make the corresponding changes here. # <Files .htaccess> Order allow,deny Deny from all </Files> # # CacheNegotiatedDocs: By default, Apache sends "Pragma: no-cache" with each # document that was negotiated on the basis of content. This asks proxy # servers not to cache the document. Uncommenting the following line disables # this behavior, and proxies will be allowed to cache the documents. # #CacheNegotiatedDocs # # UseCanonicalName: (new for 1.3) With this setting turned on, whenever # Apache needs to construct a self-referencing URL (a URL that refers back # to the server the response is coming from) it will use ServerName and # Port to form a "canonical" name. With this setting off, Apache will # use the hostname:port that the client supplied, when possible. This # also affects SERVER_NAME and SERVER_PORT in CGI scripts. # UseCanonicalName On # # TypesConfig describes where the mime.types file (or equivalent) is # to be found. # TypesConfig conf/mime.types # # DefaultType is the default MIME type the server will use for a document # if it cannot otherwise determine one, such as from filename extensions. # If your server contains mostly text or HTML documents, "text/plain" is # a good value. If most of your content is binary, such as applications # or images, you may want to use "application/octet-stream" instead to # keep browsers from trying to display binary files as though they are # text. # DefaultType text/plain # # The mod_mime_magic module allows the server to use various hints from the # contents of the file itself to determine its type. The MIMEMagicFile # directive tells the module where the hint definitions are located. # mod_mime_magic is not part of the default server (you have to add # it yourself with a LoadModule [see the DSO paragraph in the 'Global # Environment' section], or recompile the server and include mod_mime_magic # as part of the configuration), so it's enclosed in an <IfModule> container. # This means that the MIMEMagicFile directive will only be processed if the # module is part of the server. # <IfModule mod_mime_magic.c> MIMEMagicFile conf/magic </IfModule> # # HostnameLookups: Log the names of clients or just their IP addresses # e.g., www.apache.org (on) or 204.62.129.132 (off). # The default is off because it'd be overall better for the net if people # had to knowingly turn this feature on, since enabling it means that # each client request will result in AT LEAST one lookup request to the # nameserver. # HostnameLookups Off # # ErrorLog: The location of the error log file. # If you do not specify an ErrorLog directive within a <VirtualHost> # container, error messages relating to that virtual host will be # logged here. If you *do* define an error logfile for a <VirtualHost> # container, that host's errors will be logged there and not here. # ErrorLog logs/error_log # # LogLevel: Control the number of messages logged to the error_log. # Possible values include: debug, info, notice, warn, error, crit, # alert, emerg. # LogLevel warn # # The following directives define some format nicknames for use with # a CustomLog directive (see below). # LogFormat "%h %l %u %t \"%r\" %>s %b \"%{Referer}i\" \"%{User-Agent}i\"" combined LogFormat "%h %l %u %t \"%r\" %>s %b" common LogFormat "%{Referer}i -> %U" referer LogFormat "%{User-agent}i" agent # # The location and format of the access logfile (Common Logfile Format). # If you do not define any access logfiles within a <VirtualHost> # container, they will be logged here. Contrariwise, if you *do* # define per-<VirtualHost> access logfiles, transactions will be # logged therein and *not* in this file. # #CustomLog logs/access_log common # # If you would like to have agent and referer logfiles, uncomment the # following directives. # #CustomLog logs/referer_log referer #CustomLog logs/agent_log agent # # If you prefer a single logfile with access, agent, and referer information # (Combined Logfile Format) you can use the following directive. # CustomLog logs/access_log combined # # Optionally add a line containing the server version and virtual host # name to server-generated pages (error documents, FTP directory listings, # mod_status and mod_info output etc., but not CGI generated documents). # Set to "EMail" to also include a mailto: link to the ServerAdmin. # Set to one of: On | Off | EMail # ServerSignature On # # Aliases: Add here as many aliases as you need (with no limit). The format is # Alias fakename realname # # Note that if you include a trailing / on fakename then the server will # require it to be present in the URL. So "/icons" isn't aliased in this # example, only "/icons/".. # Alias /icons/ "/var/www/icons/" <Directory "/var/www/icons"> Options Indexes MultiViews AllowOverride None Order allow,deny Allow from all </Directory> <Directory "/var/www/htdocs/manual"> Options MultiViews AllowOverride None Order allow,deny Allow from all </Directory> # # ScriptAlias: This controls which directories contain server scripts. # ScriptAliases are essentially the same as Aliases, except that # documents in the realname directory are treated as applications and # run by the server when requested rather than as documents sent to the client. # The same rules about trailing "/" apply to ScriptAlias directives as to # Alias. # ScriptAlias /cgi-bin/ "/var/www/cgi-bin/" # # "/var/www/cgi-bin" should be changed to whatever your ScriptAliased # CGI directory exists, if you have that configured. # <Directory "/var/www/cgi-bin"> AllowOverride None Options None Order allow,deny Allow from all </Directory> # # Redirect allows you to tell clients about documents which used to exist in # your server's namespace, but do not anymore. This allows you to tell the # clients where to look for the relocated document. # Format: Redirect old-URI new-URL # # # Directives controlling the display of server-generated directory listings. # # # FancyIndexing is whether you want fancy directory indexing or standard # IndexOptions FancyIndexing # # AddIcon* directives tell the server which icon to show for different # files or filename extensions. These are only displayed for # FancyIndexed directories. # AddIconByEncoding (CMP,/icons/compressed.gif) x-compress x-gzip AddIconByType (TXT,/icons/text.gif) text/* AddIconByType (IMG,/icons/image2.gif) image/* AddIconByType (SND,/icons/sound2.gif) audio/* AddIconByType (VID,/icons/movie.gif) video/* AddIcon /icons/binary.gif .bin .exe AddIcon /icons/binhex.gif .hqx AddIcon /icons/tar.gif .tar AddIcon /icons/world2.gif .wrl .wrl.gz .vrml .vrm .iv AddIcon /icons/compressed.gif .Z .z .tgz .gz .zip AddIcon /icons/a.gif .ps .ai .eps AddIcon /icons/layout.gif .html .shtml .htm .pdf AddIcon /icons/text.gif .txt AddIcon /icons/c.gif .c AddIcon /icons/p.gif .pl .py AddIcon /icons/f.gif .for AddIcon /icons/dvi.gif .dvi AddIcon /icons/uuencoded.gif .uu AddIcon /icons/script.gif .conf .sh .shar .csh .ksh .tcl AddIcon /icons/tex.gif .tex AddIcon /icons/bomb.gif core AddIcon /icons/back.gif .. AddIcon /icons/hand.right.gif README AddIcon /icons/folder.gif ^^DIRECTORY^^ AddIcon /icons/blank.gif ^^BLANKICON^^ # # DefaultIcon is which icon to show for files which do not have an icon # explicitly set. # DefaultIcon /icons/unknown.gif # # AddDescription allows you to place a short description after a file in # server-generated indexes. These are only displayed for FancyIndexed # directories. # Format: AddDescription "description" filename # #AddDescription "GZIP compressed document" .gz #AddDescription "tar archive" .tar #AddDescription "GZIP compressed tar archive" .tgz # # ReadmeName is the name of the README file the server will look for by # default, and append to directory listings. # # HeaderName is the name of a file which should be prepended to # directory indexes. # # The server will first look for name.html and include it if found. # If name.html doesn't exist, the server will then look for name.txt # and include it as plaintext if found. # ReadmeName README HeaderName HEADER # # IndexIgnore is a set of filenames which directory indexing should ignore # and not include in the listing. Shell-style wildcarding is permitted. # IndexIgnore .??* *~ *# HEADER* README* RCS CVS *,v *,t # # AddEncoding allows you to have certain browsers (Mosaic/X 2.1+) uncompress # information on the fly. Note: Not all browsers support this. # Despite the name similarity, the following Add* directives have nothing # to do with the FancyIndexing customization directives above. # AddEncoding x-compress Z AddEncoding x-gzip gz # # AddLanguage allows you to specify the language of a document. You can # then use content negotiation to give a browser a file in a language # it can understand. Note that the suffix does not have to be the same # as the language keyword --- those with documents in Polish (whose # net-standard language code is pl) may wish to use "AddLanguage pl .po" # to avoid the ambiguity with the common suffix for perl scripts. # AddLanguage en .en AddLanguage fr .fr AddLanguage de .de AddLanguage da .da AddLanguage el .el AddLanguage it .it # # LanguagePriority allows you to give precedence to some languages # in case of a tie during content negotiation. # Just list the languages in decreasing order of preference. # LanguagePriority en fr de # # AddType allows you to tweak mime.types without actually editing it, or to # make certain files to be certain types. # # For example, the PHP module (not part of the Apache distribution) # will typically use: # #AddType application/x-httpd-php .php # # AddHandler allows you to map certain file extensions to "handlers", # actions unrelated to filetype. These can be either built into the server # or added with the Action command (see below) # # If you want to use server side includes, or CGI outside # ScriptAliased directories, uncomment the following lines. # # To use CGI scripts: # #AddHandler cgi-script .cgi # # To use server-parsed HTML files # #AddType text/html .shtml #AddHandler server-parsed .shtml # # Uncomment the following line to enable Apache's send-asis HTTP file # feature # #AddHandler send-as-is asis # # If you wish to use server-parsed imagemap files, use # #AddHandler imap-file map # # To enable type maps, you might want to use # #AddHandler type-map var # # Action lets you define media types that will execute a script whenever # a matching file is called. This eliminates the need for repeated URL # pathnames for oft-used CGI file processors. # Format: Action media/type /cgi-script/location # Format: Action handler-name /cgi-script/location # # # MetaDir: specifies the name of the directory in which Apache can find # meta information files. These files contain additional HTTP headers # to include when sending the document # #MetaDir .web # # MetaSuffix: specifies the file name suffix for the file containing the # meta information. # #MetaSuffix .meta # # Customizable error response (Apache style) # these come in three flavors # # 1) plain text #ErrorDocument 500 "The server made a boo boo. # n.b. the (") marks it as text, it does not get output # # 2) local redirects #ErrorDocument 404 /missing.html # to redirect to local URL /missing.html #ErrorDocument 404 /cgi-bin/missing_handler.pl # N.B.: You can redirect to a script or a document using server-side-includes. # # 3) external redirects #ErrorDocument 402 [url="http://some.other_server.com/subscription_info.html"]http://some.other_server.com/subscription_info.html[/url] # N.B.: Many of the environment variables associated with the original # request will *not* be available to such a script. # # The following directives modify normal HTTP response behavior. # The first directive disables keepalive for Netscape 2.x and browsers that # spoof it. There are known problems with these browser implementations. # The second directive is for Microsoft Internet Explorer 4.0b2 # which has a broken HTTP/1.1 implementation and does not properly # support keepalive when it is used on 301 or 302 (redirect) responses. # BrowserMatch "Mozilla/2" nokeepalive BrowserMatch "MSIE 4\.0b2;" nokeepalive downgrade-1.0 force-response-1.0 # # The following directive disables HTTP/1.1 responses to browsers which # are in violation of the HTTP/1.0 spec by not being able to grok a # basic 1.1 response. # BrowserMatch "RealPlayer 4\.0" force-response-1.0 BrowserMatch "Java/1\.0" force-response-1.0 BrowserMatch "JDK/1\.0" force-response-1.0 # # Allow server status reports, with the URL of [url="http://servername/server-status"]http://servername/server-status[/url] # Change the ".your_domain.com" to match your domain to enable. # #<Location /server-status> # SetHandler server-status # Order deny,allow # Deny from all # Allow from .your_domain.com #</Location> # # Allow remote server configuration reports, with the URL of # [url="http://servername/server-info"]http://servername/server-info[/url] (requires that mod_info.c be loaded). # Change the ".your_domain.com" to match your domain to enable. # #<Location /server-info> # SetHandler server-info # Order deny,allow # Deny from all # Allow from .your_domain.com #</Location> # # There have been reports of people trying to abuse an old bug from pre-1.1 # days. This bug involved a CGI script distributed as a part of Apache. # By uncommenting these lines you can redirect these attacks to a logging # script on phf.apache.org. Or, you can record them yourself, using the script # support/phf_abuse_log.cgi. # #<Location /cgi-bin/phf*> # Deny from all # ErrorDocument 403 [url="http://phf.apache.org/phf_abuse_log.cgi"]http://phf.apache.org/phf_abuse_log.cgi[/url] #</Location> # # Proxy Server directives. Uncomment the following lines to # enable the proxy server: # #<IfModule mod_proxy.c> #ProxyRequests On # #<Directory proxy:*> # Order deny,allow # Deny from all # Allow from .your_domain.com #</Directory> # # Enable/disable the handling of HTTP/1.1 "Via:" headers. # ("Full" adds the server version; "Block" removes all outgoing Via: headers) # Set to one of: Off | On | Full | Block # #ProxyVia On # # To enable the cache as well, edit and uncomment the following lines: # (no cacheing without CacheRoot) # #CacheRoot "/var/www/proxy" #CacheSize 5 #CacheGcInterval 4 #CacheMaxExpire 24 #CacheLastModifiedFactor 0.1 #CacheDefaultExpire 1 #NoCache a_domain.com another_domain.edu joes.garage_sale.com #</IfModule> # End of proxy directives. ### Section 3: Virtual Hosts # # VirtualHost: If you want to maintain multiple domains/hostnames on your # machine you can setup VirtualHost containers for them. # Please see the documentation at <URL:http://www.apache.org/docs/vhosts/> # for further details before you try to setup virtual hosts. # You may use the command line option '-S' to verify your virtual host # configuration. # # If you want to use name-based virtual hosts you need to define at # least one IP address (and port number) for them. # #NameVirtualHost 12.34.56.78:80 #NameVirtualHost 12.34.56.78 NameVirtualHost 192.168.0.2:80 <VirtualHost monstre.***.fr:*> ServerAdmin webmaster_AT_no-spam.com DocumentRoot /var/www/htdocs/stats ServerName monstre.***.fr ErrorLog /var/log/stats.***.fr-error_log CustomLog /var/log/stats.***.fr-access_log combined <Files "/var/www/htdocs/stats"> </Files> ServerPath /var/www/htdocs/stats </VirtualHost> # AWStats directory. Alias /awstatsclasses "/usr/local/awstats/wwwroot/classes/" Alias /awstatscss "/usr/local/awstats/wwwroot/css/" Alias /awstatsicons "/usr/local/awstats/wwwroot/icons/" ScriptAlias /awstats/ "/usr/local/awstats/wwwroot/cgi-bin/" # # This is to permit URL access to scripts/files in AWStats directory. # <Directory "/usr/local/awstats/"> Options None AllowOverride None Order allow,deny Allow from all </Directory> # # VirtualHost example: # Almost any Apache directive may go into a VirtualHost container. # #<VirtualHost ip.address.of.host.some_domain.com> # ServerAdmin webmaster_AT_host.some_domain.com # DocumentRoot /www/docs/host.some_domain.com # ServerName host.some_domain.com # ErrorLog logs/host.some_domain.com-error_log # CustomLog logs/host.some_domain.com-access_log common #</VirtualHost> #<VirtualHost _default_:*> #</VirtualHost> ## ## SSL Global Context ## ## All SSL configuration in this context applies both to ## the main server and all SSL-enabled virtual hosts. ## # # Some MIME-types for downloading Certificates and CRLs # <IfDefine SSL> AddType application/x-x509-ca-cert .crt AddType application/x-pkcs7-crl .crl </IfDefine> <IfModule mod_ssl.c> # Pass Phrase Dialog: # Configure the pass phrase gathering process. # The filtering dialog program (`builtin' is a internal # terminal dialog) has to provide the pass phrase on stdout. SSLPassPhraseDialog builtin # Inter-Process Session Cache: # Configure the SSL Session Cache: First either `none' # or `dbm:/path/to/file' for the mechanism to use and # second the expiring timeout (in seconds). SSLSessionCache dbm:logs/ssl_scache SSLSessionCacheTimeout 300 # Semaphore: # Configure the path to the mutual exclusion semaphore the # SSL engine uses internally for inter-process synchronization. SSLMutex sem # Pseudo Random Number Generator (PRNG): # Configure one or more sources to seed the PRNG of the # SSL library. The seed data should be of good random quality. SSLRandomSeed startup builtin SSLRandomSeed connect builtin #SSLRandomSeed startup file:/dev/random 512 #SSLRandomSeed startup file:/dev/urandom 512 #SSLRandomSeed connect file:/dev/random 512 #SSLRandomSeed connect file:/dev/urandom 512 SSLRandomSeed startup file:/dev/arandom 512 # Logging: # The home of the dedicated SSL protocol logfile. Errors are # additionally duplicated in the general error log file. Put # this somewhere where it cannot be used for symlink attacks on # a real server (i.e. somewhere where only root can write). # Log levels are (ascending order: higher ones include lower ones): # none, error, warn, info, trace, debug. SSLLog logs/ssl_engine_log SSLLogLevel info </IfModule> <IfDefine SSL> ## ## SSL Virtual Host Context ## <VirtualHost _default_:443> # General setup for the virtual host DocumentRoot /var/www/htdocs ServerName new.host.name ServerAdmin you_AT_your.address ErrorLog logs/error_log TransferLog logs/access_log # SSL Engine Switch: # Enable/Disable SSL for this virtual host. SSLEngine on # SSL Cipher Suite: # List the ciphers that the client is permitted to negotiate. # See the mod_ssl documentation for a complete list. #SSLCipherSuite ALL:!ADH:RC4+RSA:+HIGH:+MEDIUM:+LOW:+SSLv2:+EXP # Server Certificate: # Point SSLCertificateFile at a PEM encoded certificate. If # the certificate is encrypted, then you will be prompted for a # pass phrase. Note that a kill -HUP will prompt again. A test # certificate can be generated with `make certificate' under # built time. SSLCertificateFile /etc/ssl/server.crt # Server Private Key: # If the key is not combined with the certificate, use this # directive to point at the key file. SSLCertificateKeyFile /etc/ssl/private/server.key # Certificate Authority (CA): # Set the CA certificate verification path where to find CA # certificates for client authentication or alternatively one # huge file containing all of them (file must be PEM encoded) # Note: Inside SSLCACertificatePath you need hash symlinks # to point to the certificate files. Use the provided # Makefile to update the hash symlinks after changes. #SSLCACertificatePath /var/www/conf/ssl.crt #SSLCACertificateFile /var/www/conf/ssl.crt/ca-bundle.crt # Client Authentication (Type): # Client certificate verification type and depth. Types are # none, optional, require and optional_no_ca. Depth is a # number which specifies how deeply to verify the certificate # issuer chain before deciding the certificate is not valid. #SSLVerifyClient require #SSLVerifyDepth 10 # Access Control: # With SSLRequire you can do per-directory access control based # on arbitrary complex boolean expressions containing server # variable checks and other lookup directives. The syntax is a # mixture between C and Perl. See the mod_ssl documentation # for more details. #<Location /> #SSLRequire ( %{SSL_CIPHER} !~ m/^(EXP|NULL)-/ \ # and %{SSL_CLIENT_S_DN_O} eq "Snake Oil, Ltd." \ # and %{SSL_CLIENT_S_DN_OU} in {"Staff", "CA", "Dev"} \ # and %{TIME_WDAY} >= 1 and %{TIME_WDAY} <= 5 \ # and %{TIME_HOUR} >= 8 and %{TIME_HOUR} <= 20 ) \ # or %{REMOTE_ADDR} =~ m/^192\.76\.162\.[0-9]+$/ #</Location> # SSL Engine Options: # Set various options for the SSL engine. # FakeBasicAuth: # Translate the client X.509 into a Basic Authorisation. This means that # the standard Auth/DBMAuth methods can be used for access control. The # user name is the `one line' version of the client's X.509 certificate. # Note that no password is obtained from the user. Every entry in the user # file needs this password: `xxj31ZMTZzkVA'. # ExportCertData: # This exports two additional environment variables: SSL_CLIENT_CERT and # SSL_SERVER_CERT. These contain the PEM-encoded certificates of the # server (always existing) and the client (only existing when client # authentication is used). This can be used to import the certificates # into CGI scripts. # CompatEnvVars: # This exports obsolete environment variables for backward compatibility # to Apache-SSL 1.x, mod_ssl 2.0.x, Sioux 1.0 and Stronghold 2.x. Use this # to provide compatibility to existing CGI scripts. #SSLOptions +FakeBasicAuth +ExportCertData +CompatEnvVars # Per-Server Logging: # The home of a custom SSL log file. Use this when you want a # compact non-error SSL logfile on a virtual host basis. CustomLog logs/ssl_request_log \ "%t %h %{SSL_PROTOCOL}x %{SSL_CIPHER}x \"%r\" %b" </VirtualHost> </IfDefine>
  17. Yes je viens de réussir (je poste ci-dessus la solution cela peut servir à d'autres). Adding KDE (as root): # pkg_add -v ftp://ftp.openbsd.org/pub/OpenBSD/3.x/pac...kdelibs-3.x.tgz # pkg_add -v ftp://ftp.openbsd.org/pub/OpenBSD/3.x/pac...kdebase-3.x.tgz # cd /root create a file called .xinitrc (vi commands -> http://www.cs.colostate.edu/helpdocs/vi.html) # vi .xinitrc After vi opens press i to start to insert text: #!/bin/sh /usr/local/bin/startkde Then press <esc> then save the file by typing :w <enter> then quit vi :q then start kde startx
  18. Bonjour Dan et merci pour ta réponse. Je viens de réussir laborieusement à installer les ports sur ma machine (et quand on trouve on se sent tellement c'est simple après). J'ai donc trouve le repertoire KDE dans les ports. J'ai fait : install all et ça a bien commencé mais après j'ai eu un message d'erreur avant la fin d'installation et cela à tout planté. Je cherche mais il n'y a pas bcp de tuto adaptés au novices sur le net
  19. Bonjour, Je viens de m'installer OpenBSD sur une machine qui me serviera pour étudier apprendre un peu sur les systèmes BSD mais aussi de serveur de test pour mes sites. Je suis actuellement entrain de télécharger les ports. J'ai recherché sur le net un tuto pour installer KDE mais je n'ai rien trouvé de suffisemment explicite pour un newbee... Peut être pouvez vous me dire qu'elle est la meilleur façon d'installer KDE avec toutes ses dépendances... Pour info sur ma machine Xserver est installé. Merci d'avance
  20. Merci Nullette & Dan pour ces explications. En fait je cherchais un addon car il y a deux tables à purger en même temps et j'ai du mal avec les requetes ou il faut lier des tables phpbb_privmsgs_text clef : privmsgs_text_id phpbb_privmsgs clef : privmsgs_id
  21. Bonjour, Je me suis rendu compte que la taille des fichiers contenant les messages privés sur un de mes sites est importante et beaucoup de ces messages sont très très anciens parfois quelques années. Connaitriez vous un addon pour gérer les messages privés sous phpbb qui permettrait notamment de supprimer tout ceux antérieurs à une certaine date ??? sinon je devrai passer par des requêtes SQL Merci d'avance
  22. Je suis novice avec ce programme mais d'après ce que j'en ai vu, je pense qu'il est possible de le faire, mais il me semble que certains sur le hub, sont assez famillié de ce script et pourront mieux te confirmer
  23. J'ai commencé à regarde mais je n'arrives pas à comprendre comment faut il le parametrer pour appeler une bannière en fonction de la catégorie. J'ai crée un topic à cet égard ici
  24. Bonjour, J'ai installé en test PHPADSNEW et je cherche à le configurer, je suis actuellement entrain de lire la doc mais cela me semble tout de même un peu compliqué. J'aimerai donc me servir de PHPADSNEW pour plusieurs sites qui ne sont pas tous hébergé sur la même machine. Sur chaque sites plusieurs emplacements publicitaires différents. Mais certains de ces emplacements doivent pouvoir appeler une bannière différente en fonction d'un "ID" C'est à dire par exemple sur un de mes forum en bas des topics il y a un emplacement publicitaire mais j'aimerai que celui ci appelle une bannière différente en fonction du forum dans lequel se situe le topic. Par exemple topic dans forum 5 appelle une pub "emplacement topic" ayant en paramètre 5 et un autre topic dans le forum appelle une pub "emplacement topic" ayant un parametre 3... Si vous avez des idées pour le paramètrage, ça serait sympa
×
×
  • Créer...